PS4 9.60 Downgrade to 7.55 Official

PlaystationPortal can exclusive offer PS4 9.60 Official Firmware Downgrade to 7.55 Official . This method works on almost every model include new Slim and PRO. For install follow instructions below.

Requirements

  • PS4 9.60 or below (We strong recommend  to be on last 9.60 official Download Here)
  • USB Stick with least 1Gb free space (USB must be formated in FAT32)
  • Winrar (You can download from here)
  • Works even on PS4 Pro and PS4 Slim EXCEPT “CUH-1106AB02” (Do not try to install on this model)

Instructions

Step 1: Download PS4 Firmware Downgrader

This image has an empty alt attribute; its file name is download-button.png

Step 2: Unzip with Winrar
Step 3: Create a folder in the root of the USB stick called PS4
Step 4: Create a folder inside the PS4 folder called UPDATE
Step 5: Copy PS4UPDAT.PUP into UPDATE folder on USB

This image has an empty alt attribute; its file name is how-to-manually-update-the-playstation-4-and-ps4-pro-picture-2-RwA6zVUFC.jpg

Step 6: Check PS4 version before as you can see this PS4 is on 9.60

Step 8: Completely shut down your PS4. When the power light is off (indicating the system is totally shut down), insert your flash drive, and then press the PS4 power button and hold it down. The unit will beep once when the system turns on, but continue holding the button until it beeps again—it takes about seven seconds. This second beep means the system is entering Safe Mode. When the system turns on, connect a DualShock controller over USB, and then press the PS button.

This image has an empty alt attribute; its file name is connect-ds4.jpg

Step 9: When the Safe Mode menu loads, select “Update System Software” to launch the update menu.

This image has an empty alt attribute; its file name is safemode.jpg

Step 10: On the next screen, choose the “Update from USB Storage Device” option. If you haven’t already connected your flash drive, you’ll have a chance to do so now. Just select “OK” to continue when your drive is connected.

This image has an empty alt attribute; its file name is update-from-usb.jpg

Step 11: Your PS4 will take a few minutes to search for the update file, and then it should tell you there’s a system update available Version 9.60 downgrade to 7.55. Click “Next” to install the update.

Step 12: The PS4 will take a few seconds to copy the update file from the flash drive. When that’s done, click the “Update” button to restart the system and install the update.

This image has an empty alt attribute; its file name is will-be-updated.jpg

Step 13: After the PS4 restarts, it begins the update. Just let it do its thing while you chill out. When it’s finished, the PS4 will restart again, and you should be running the newest version.

This image has an empty alt attribute; its file name is updateing.jpg

Step 14: After install your PS4 will be on Official 7.55 Firmware

Now you can do whatever you want!

PLEASE DISABLE AUTOMATIC UPDATES AFTER DOWNGRADE

Disable automatic updates: In Settings –> System –>Automatic Downloads and Uploads, make sure “System Software Update Files” and “Install Automatically” are both unchecked

This image has an empty alt attribute; its file name is ps4_disable_updates-678x381-1.jpeg

14 thoughts on “PS4 9.60 Downgrade to 7.55 Official

Leave a Reply

Your email address will not be published.